Operation Manual

37
Gigrac 300 / 600 - Specifiche TGigrac 300 / 600 - Specifiche T
Gigrac 300 / 600 - Specifiche TGigrac 300 / 600 - Specifiche T
Gigrac 300 / 600 - Specifiche T
ecnicheecniche
ecnicheecniche
ecniche
Noise
EIN 150 ohms 20 –22kHz CH1 – CH4 -123 dBu
EIN 150 ohms 20-22kHz CH5 – CH6 -123 dBu
Main Out Level Control Mid -78 dBu
Mon Out Level Control Mid -80 dBu
Amp Out -57 dBu
Crosstalk
Main Cutoff -80 dB
Mon Cutoff -80 dB
Risposta in frequenza
20 – 22Khz rel. 1kHz Line In-to-Main Out +0.2/-2.6 X dB
THD+N
Mic i/p –20dB Pad 0dBu I/P in uscita Main Out (22Hz-22kHz) 0.15 %
Mic i/p in uscita Amp Out @ Full Power 22-22kHz 0.15%
INGRESSI CH1 – CH4
Mic Input - Impedenza 5.5 kohms
Line Input - Impedenza 30 kohms
Max Input Mic ( 20dB pad ) -3.5 dBu
Max Input Line( 20dB pad ) 10 dBu
Max Mic gain in uscita Main Out 60 dB
INGRESSI CH5 – CH8
Mic Input - Impedenza 2.4 kohms
Line Input - Impedenza 40 kohms
Max Input Mic -18 dBu
Max Input Line 3 dBu
Max Mic gain in uscita Main Out 50 dB
USCITE
Max Out Main / Mon 18dBu
Power Output Gigrac 300: 300W a 4 ohms
Power Output Gigrac 600: 2 X 300W a 4 ohms
CONNETTORI
(tutti i connettori jack sono da ¼”, a 3–poli )
Mic: connettori Combi XLR bilanciati/ connettori Combi jack bilanciati
Line: jack bilanciati / connettori Combi / RCA phono sbilanciati
Uscita FX Bus: jack bilanciato
Ingresso Submix: jack sbilanciato
Uscita Main Out: jack bilanciato
Uscita Mon Out: jack bilanciato
Uscita Record Out: RCA phono sbilanciati
Phones: jack
Speakers: Speakon (pins +1 e -1) e jack