Operation Manual

26
482
i
i
638
Y
ABMESSUNGEN
MONTAGE VON RACKWINKELN (ZUBEHÖR MPMi12)
Rackmontage-Zubehör ist beim MPMi 12 im Lieferumfang enthalten
A A
B2
B1
Remove the screw at point ,
Attach the rack brackets to both sides of mixer at points with the screws
removed at and above.
B2
B1
repeat on the other side of the mixer.
A B1
Keep the side mouldings in case you want to re-fit them at a later date.
WARNING: ensure that the mixer is disconnected from the mains supply
and all other equipment before fitting the rack-mounting brackets.
A
and remove the side mouldings.Undo and remove the screws at
A A
B2
B1
Remove the screw at point ,
Attach the rack brackets to both sides of mixer at points with the screws
removed at and above.
B2
B1
repeat on the other side of the mixer.
A B1
Keep the side mouldings in case you want to re-fit them at a later date.
WARNING: ensure that the mixer is disconnected from the mains supply
and all other equipment before fitting the rack-mounting brackets.
A
and remove the side mouldings.Undo and remove the screws at