User's Manual

4.2: STEREO INPUT
CONSOLE ROUTING > STEREO INPUT
4.2: STEREO INPUT ROUTING
Stereo TRS Input
Channels
Stereo TRS channels
have two TRS input
jacks and have the same
routing options as mono
input channels.
Aux bus contributions
from stereo channels
are stereo such that
when the Aux output is
in headphone mode, a
stereo mix is heard.
These stereo channels
have trim controls.
Stereo RCA/USB Input
Channel
The Stereo RCA/USB
input channel is a stereo
sum of the RCA inputs
and USB channels 1
and 2. It is usually used
as a playback channel
and works for conven-
ient 2-track playback
functionality from unbal-
anced consumer audio
players into the RCA
jacks, or from computer,
tablet, or phone connec-
tions to the USB jack.
There is no trim or EQ
on this channel.
Stereo FX Return
Channel (Notepad
12FX only)
(See next section: FX
Return)
NOTEPAD 5, 8FX, 12FX User Manual
To USB audio routing
LEVEL ROTARY
Level control to
mix the source.
AUX/FX
Send an independent
signal level to the
eects module and
aux bus
Pre-fade aux send
To aux master
control and
eects
BALANCE
Adjust the left /
right mix levels
00
+10dB
-
∞
RL
0
+10dB
-
∞
To master
level control
STEREO INPUT
TRS left and right
inputs can also be used
as a mono input with a
single jack in the left
socket
TRIM
Increase / decrease the
signal level
+20dB–20
AUX/FX AUX/FX AUX/FX AUX/FX AUX/FX AUX/FX MASTER
LINE
LINE
L
5
R
6
Stereo Line sources
–
BAL
LEVEL
TRIM
+20dB-20
RL
AUX/FX AUX/FX AUX/FX AUX/FX
AUX/FX
AUX/FX
0
0
LINE
LINE
L
5
R
6
+10dB
-
∞
+10dB
-
∞
NOTEPAD-12FX 4x4 USB NOTEPAD-12FX 4 x 4 USB