User Manual

21
Soundcraft Si Expression User Guide V1.0 0213
GLOBAL MODE ENCODERS AND FUNCTIONS
The Global Mode encoders offer control of a key parameter across all channels or buses currently
active on the surface:
1. GLOBAL ‘GAIN/TRIM’ key: press to make all the encoders function as the input GAIN (or TRIM
for line & digital sources) for all the channels on the currently active fader layer.
2. NOTE: This key has no function in BUS or MATRIX modes.
3. GLOBAL ‘FILT’ key: press to make all the encoders function as the input HPF for all the channels
on the currently active input fader layer.
NOTE: This key has no function in MATRIX mode.
4. GLOBAL ‘PAN’ key: press to make all the encoders function as the PAN for all the channels or
buses on the channels on the currently active fader layer.
NOTE: This key has no function in MATRIX mode.
NOTE: When mixing to a stereo bus using the tOTEM follow keys the global encoders will switch
to PAN mode and shall act as the PAN or BALANCE control from the channels to the bus.
1 2 3