User Manual

Soundcraft Si Expression User Guide V1.0 0213

MUTE & MUTE MASTER KEYS

1. MUTE key: press this key to toggle in/out of mute setup mode; the

key has no function on its own and requires the selection of one of

the mute masters 1-4 to indicate which of the mute masters you are

going to congure.

2. MUTE MASTERS 1-4: while mute master setup is active these keys

dene which mute master you are setting assignments for, when not in

MUTE SETUP the keys act as the mute masters..

SETTING AND USING MUTE MASTERS:

a. Press the MUTE key then one of the MUTE MASTER keys 1-4; SELect

keys will light if any of the channels or buses on the surface is assigned

as a slave to the selected mute master.

b. Add or remove slaves by pressing the SELect keys on the channels or

buses you wish added or removed from the mute master.

c. Press the MUTE key to nish the setup.

d. Active any mute mater(s) by pressing the MUTE MASTER keys.

NOTE: While in mute setup mode it is possible to clear all slaves to any mute master with

[CLR] + [MUTE MASTER 1-4].

NOTE: For any channels or buses muted by a mute master the channel or bus ON key changes

from green to red.