User Manual

34
Soundcraft Si Expression User Guide V1.0 0213
NETWORK: Information and settings regarding Ethernet connectivity:
• MAC Address – Displays MAC
address of console, cannot be
edited.
• IP Address Resolution – Toggles
between MANUAL or DHCP for
setting the console IP address.
• IP Address – Allows manual
setting of the IP address.
• Subnet Mask – Allows manual
setting of the subnet mask.
NOTE: Address and Subnet can only be edited in MANUAL mode.
NOTE: Console must be rebooted for IP address change to take effect.
HiQnet: Information and settings regarding HiQnet connectivity:
• HiQnet – Toggles HiQnet functionality Enabled/Disabled
• HiQnet Address – Allows setting of the console HiQnet address
NOTE: Clocking, Network & HiQnet settings are stored as part of the console conguration.
NOTE: A console reboot is required for IP Address, Subnet Mask and HiQnet to take effect.
RESET CHANNELS: Resets all Input
Channel audio parameters, channel
name and channel type (MONO/LINKED)
to factory default.
NOTE: Patching is excluded from Reset
Channels.
RESET BUSES: Resets all audio parameters of all mix buses 1-14, bus name and bus type
(mono/stereo) to factory default.
NOTE: Patching is excluded from Reset Buses.
RESET PATCHING: Resets all system patching to factory default.
RESET ALL: Resets all parameters including names and patches to factory default.
NOTE: With all RESET menus a conrm dialogue is provided allowing the action to be
cancelled.