User Manual

Soundcraft Si Expression User Guide V1.0 0213

COPY & PASTE

This facility allows almost any processing section to be copied easily and quickly from a

channel or bus and pasted to another channel or bus.

NOTE: The clipboard captures the state of an item at the point COPY & PASTE mode

is activated or SELect is changed; changes to the SELected source channel will not

be updated to the clipboard unless you re-SELect that channel/bus/contribution etc.

NOTE: COPY/PASTE does not copy GAIN or 48v as these are considered ‘external

attributes’ not a part of the processing channel itself.

NOTE: COPY/PASTE does not copy names, MUTE assignments, or patching assignments.

NOTE: When copying a stereo channel or bus the left channel is copied.

NOTE: When pasting to a stereo channel or bus the clipboard is copied to both the left

and right sides.

To copy a channel or bus: SELect your source channel or bus and making any changes

before pressing COPY & PASTE. Pressing the COPY & PASTE button copies all parameters of

the currently SELected channel or bus to the clipboard:

1. CHAN – Copies channel or bus level & ON status.

2. IN – Copies phase, HPF lter and in/out status (where applicable).

3. GATE – Copies all gate parameters and in/out status (where applicable).

4. COMP – Copies all compressor parameters and in/out status.

5. EQUALISER – Copies all parametric EQ parameters and in/out status.

6. OUT – Copies delay, pan and routing (where applicable).

7. SENDS – Copies channel to bus or bus to matrix sends and on/off status (where

applicable).

8. GEQ – Copies GEQ (where applicable).

Elements of the channel or bus such as COMPressor may be toggled on/off of the clipboard

by touching the icon on the screen.

5 6