User Manual
39
Soundcraft Si Expression User Guide V1.0 0213
FADER SETUP
The fader setup provides a mean to dene which channels (or buses) appear on which
faders of which layers.
This feature allows almost any channel or mix master controller fader to be placed on any
layer, it is accessed from the FADER SETUP menu; there are essentially two elements to this,
making new assignments and moving assignments. .
Making a new assignment or changing a current assignment in the SELected slot.
The FADER SETUP page displays two xed data elds of:
• Fader Bank – Current active fader bank
• Slot Number – which slot (position) has the SELect active
The following elds group the available processing channels, buses and controllers allowing
easy selection of the channel bus or controller you wish to assign to the SELected slot,
selecting any eld will offer a drop-down list as follows:
• Assign Mono Input – All 54 mono processing channels
• Assign Stereo Inputs - All 6 stereo processing channels
• Assign Mixes – All 14 mix bus masters
• Assign MTX – All 4 matrix bus masters
NOTE: Once a drop-down list is open a selection must be made.
NOTE: All lists offer an ‘Unassigned’ option.
NOTE: With the fader assign page open you may use change fader layers and SELect to
rapidly reassign other faders.