User Manual

47
Soundcraft Si Expression User Guide V1.0 0213
OUTPUTS MENU
The OUTPUTS menu provides information to all parameters and functions concerning system
buses and outputs.
NOTE: The OUTPUTS button is greyed-out and not accessible unless a bus is SELected.
Mix Name: The name of the currently SELected mix bus; press the scroll/adjust
encoder to access the QWERTY keyboard to edit the name
Isolate: Isolates the mix from automation playback.
NOTE: When isolated the channel settings are still stored when a cue is updated.
Mix Width*: Sets the mix as either Mono or Stereo for Mixes 9-14 and Matrix 1-4.
Making a mix stereo does not change the number of separate mixes
on the console but does change the bus width. This is how the channel
to mix bus pan works in follow mode:
• Mono input to mono mix bus – no bus pan function
• Mono input to stereo mix bus – bus pan control functions as pan
• Stereo input to mono mix bus - no bus pan function, L & R sides
of the stereo input mix to the bus at -3dB
• Stereo input to stereo mix bus – bus pan control functions as balance
(Similar for bus to matrix mixes.)
Set Mix Sends Pre/Post*:
Nominally sets all sends from channels to MIX’n’ as either Pre fader
(FaderGlow bus master is yellow) or post fader (FaderGlow bus master
is green).
NOTE: Fader Pre/Post can be changed per channel per mix see Inputs menu.