User Manual

User Manual

4.1: MAIN MENU

TOUCH SCREEN > MAIN MENU

4.1: TOUCH SCREEN > MAIN MENU

INPUTS & VCA

Input channel or VCA Master-specic settings.

The Menu will change depending on whether an Input channel or a VCA Master is selected. For INPUTS, the menu

will show Naming, patching, Channel Isolate, Mix contribution routing, and so on. See section 6.1.1 for more

information. For VCA, the Menu will show VCA Name. See section 8.7 for more information.

OSC

Settings and operations for the built in Oscillator.

Routing, waveform, frequency, and output options. See section 13 for more detail.

OUTPUTS

Output channel-specic settings.

The menu will show Naming, patching, bus routing, and so on. See section 6.2.1 for more detail.

MONITOR

Settings for the monitoring systems.

Delay, patching, and Mono Check. See section 8.5 for more information.

Graphic representation of the EQ for the selected channel.

Simply touch the EQ Touch Screen button to see the frequency response graphic - incorporates the HPF and

4-band EQ, but not the Graphic EQ. See section 7.2.4 for more on the ACS EQ section.