Operation Manual

User Manual
11.4: SOFTWARE UPDATE
SYSTEM SETTINGS > SOFTWARE UPDATE
11.4: SYSTEM SETTINGS > SOFTWARE UPDATE
The Si Performer software is updated via the USB port on the front panel. Details and special in-
structions for any release will be included with the software release package; however, the ‘normal’
procedure is listed below for reference:
1. Unzip the les to a USB key in the root directory, you should have two or three les: Performer.
bin; info.xml; PerformerFader.hex (optional, see release notes).
2. Switch the console off using the Power key (Press and hold Power Key until it ashes orange,
then press it again).
3. Press and hold the Power key for approx 5 seconds. A Software Loader screen shall appear.
4. Insert the USB stick and then press the MENU key.
5. Select the info.xml le using the adjust encoder. The LOAD button at the bottom right of the touch
screen window will appear when a valid selection is made.
6. Press the LOAD button. Software will begin loading.
7. Wait until both progress bars have reached 100%, and the ‘tick’ symbol has appeared to the right
of each progress bar, before removing the USB stick.
NOTE: Always follow on-screen instructions and release notes as updates to fader rmware
or similar may require additional user input.