User manual
Table Of Contents
- COVER
- Information
- Contents
- 1.0: Introduction
- 2.0: Getting Started
- 3.0: Software Control
- 4.0: Mixer Channels
- 5.0: Channel Edit
- 5.3: Graphic EQ
- 5.4: Dynamics
- 5.5: Aux / FX Sends
- 6.0: Mix Features
- 7.0: FX Edit
- 8.0: Shows & Snapshots
- 9.0: Media Player & Recorder
- 10.0: Settings
- Appendix 1: No Sound?
- Appendix 2: System FAQ
Ui12, Ui16 User Manual
5.2: PARAMETRIC EQ
CHANNEL EDIT > PARAMETRIC EQ
5.2: PARAMETRIC EQ
H - HPF BALL
Draggable graphic ‘ball’ for High Pass Filter control
Drag this graphic element to control. Left/Right adjusts Cut-O frequency. Double-click/tap to reset.
DE-ESSER FREQUENCY
Fader control of De-Esser Frequency
Determines the centre frequency of the De-Esser dynamic filter - the frequency on which the de-essing process is
focussed. To access the De-Esser fader controls in phone software, tap the DE-ESSER SETUP button.
DE-ESSER THRESHOLD
Fader control of De-Esser Threshold
De-Esser threshold is the level at which the De-Esser starts to attenuate the ‘ess’ band. To access the De-Esser
fader controls in phone software, tap the DE-ESSER SETUP button.
DE-ESSER RATIO
Fader control of De-Esser Ratio
De-Esser Ratio is the amount by which the ‘ess’ band is attenuated when the audio level crosses the Threshold. To
access the De-Esser fader controls in phone software, tap the DE-ESSER SETUP button.
EQ FREQUENCY
Fader control of EQ band Frequency
Fader control of EQ is only available with tablet software. Double-click/tap to reset.