User manual

Ui24R User Manual
10.1: NETWORK CONFIG
SETTINGS > NETWORK CONFIG
10.1: NETWORK CONFIG
TheUiCongpageallowsyoutoenable/disableandeditsettingsforHotspotwirelessconnectionto
theUihotspot),WiFi(connectiontoanexistingWiFinetwork),andLAN(wiredconnectionviaEthernet).
ThereisalsoanAdministrationpasswordchangepage,andasummary‘NetworkState’page.
IMPORTANT:Thedefaultadministrationusernameis‘admin’andthedefaultadministrationpasswordis‘admin’.
You will be asked for these when you touch the CONFIG button. You can either use the UI24R as a hotspot or
connect to an external Wi network. LAN is available at anytime unless disabled.
You can change the password using the Administrator Password page once you are in the CONFIG area.
Inordertoresettheunit’snetworksettingsbacktothefactorydefaultsettingsyoucanusethehardwarereset
procedure, detailed in section 3.0.2.