Operation Manual

Bus Meters
Show the buss master
signal levels.
Bus Masters can be congured as stereo channels,
therefore the Bus Master Strip level meters have left
and right meters (i.e. the left and right channels share
a single set of controls, but note that this feature is re-
served for a future release). The GRM shows the overall
gain reduction of the limiter and compressor, if they are
engaged. The Dynamics from Stereo Bus Masters are al-
ways linked, therefore both GRMs show the same value.
The overload LED indicates a value that is higher than
Full Scale (analogue output-stage clipping).
Mix Master
Meters
The L,R and C Output
Masters each have a
Level Meter and a Gain
Reduction Meter. The
L and R masters share
a stereo meter, and the
C master has a mono
version.
The overload LED indicates a value that is higher than
Full Scale (analogue output-stage clipping).
Monitor Bus
Metering
The monitor section has
a stereo level meter, but
there is no GRM associ-
ated with the monitor.
Vi3000 USER MANUAL
®
12.2 12.2: METERING > BUSSES
12.2: METERING > BUSSES
Bus Master Metering