Operation Manual
Soundcraft Vi Series™ User Guide 1112 Page 8 - 13
Creating User Dened Output Fader Pages
Step 1 – Open the Setup screens
Press the Setup button above the Output
Fader page switches in the centre-section of
the console.
This will open a Setup screen on the master
Vistonics screen – see picture below.
The Setup screen contains ve rows of buttons, corresponding to the ve Output Fader Pages A – E, for the
8 Output fader strips.
The default setup for these Fader pages will be already familiar – it is the 32 busses of the console ar-
ranged in banks of 8 in a sequential order, and with VCA 9-16 on the last page.
You can now change the layout of any of these ve pages, if necessary, and store that setup with your show
le.
The method is similar to assigning Input Fader Pages, and is described on the following page.