Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 10 - 7
Figure 10-7: Insert Setup Page.
Patching Insert Send Or Return Signals To The Connectors Or MADI Channels
* <SEND> opens the output patch page, where it is possible to dene the physical connector for
the insert send.
* <RET> opens the input patch page, where it is possible to dene the physical connector for the
insert return.
* <LABEL> opens the keyboard page, where it is possible to label the insert.
* Leave the page with <EXIT> or press the INSERT {VST cong button} again.
Stereo Inserts
Stereo inserts can be congured odd/even wise with <LINK> from the even insert number.
The following table shows the valid Format combinations.
81
• Press <SETUP> to enter the INSERT setup page for the patch points and device
names.
• <SEND> opens the output patch page, where it is possible to define the physical
connector for the insert send.
• <RET> opens the input patch page, where it is possible to define the physical
connector for the insert return.
• <LABEL> opens the keyboard page, where it is possible to label the insert
• Leave the page with <EXIT> or press INSERT { } again
STEREO Inserts
Stereo inserts can be configured odd/even wise with <LINK> from the even insert number.
The following table shows the valid Format combinations.
MONO CHANNEL PAIRED CHANNEL or
STEREO BUS
MONO
INSERT
√
X
STEREO
INSERT
√
audio is feed to both insert
sends, returns are down mixed
√