Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 11 - 1
MONITORING
SIGNAL FLOW
Figure 11-1: Monitor Block Diagram.
FUNCTION
The Monitoring section in the Soundcraft Vi Series™ has three individual monitoring outputs:
Monitor A 3 channel (LCR) format (it can be used as stereo by ignoring C)
Monitor B Stereo format
Headphones Stereo format.
For each monitoring output, the following parameters can be set or congured:
Source
Input SOLO
Output SOLO (with user congurable OUT SOLO Group)
TB from external
Audio Format (swapping or mono-ing Left or Right channels).
Two alternative monitoring sources, USER A and USER B, can be freely assigned and labelled. These can
be used for a favourite monitor mix, or a ‘shout’ talkback feed.