Operation Manual
Soundcraft Vi Series™ User Guide 1112Page 11 - 10
Output Solo Selection
Output Solo Selection allows an individual output solo to be sent only to a specic monitor output (Mon A,
B or Phones). This is useful for stage monitoring applications where the solos of in-ear monitor mixes could
be programmed to appear only on Monitor B for example, which could have an in-ear headphone system
connected to it. In this example, conventional wedge monitor mixes could be programmed to appear only
on Monitor A when soloed, where Monitor A could be connected to a wedge speaker system.
OUT SOLO A eld
Displays the Busses which are included in the OUT SOLO selection (default ALL) for Monitor A. Its VST
{cong button} opens the OUT SOLO Group conguration page (Figure 11-8).
OUT SOLO B eld
Displays the Busses which are included in the OUT SOLO selection (default ALL) for Monitor B. Its {VST
cong button} opens the OUT SOLO Group conguration page (Figure 11-8).
OUT SOLO HP eld
Displays the Busses which are included in the OUT SOLO selection (default ALL) for the headphones. Its
{VST cong button} opens the OUT SOLO selection conguration page (F
igure 11-8).
Figure 11-8: Output Solo Selection Page
Each of the 32 outputs can be switched in or out of the output monitoring group, for each of the 3
monitoring circuits. The <NONE> key deselects all of them. <EXIT> makes the display go back to the
previous page. The selctions made are mirrorred in the small OUT SOLO areas of the VST area. The colours
indicate the type of each output: Aux Group or Matrix.