Operation Manual
Soundcraft Vi Series™ User Guide 1112 Page 12 - 3
<OSC to BUS>
Feeds the Oscillator to the precongured Busses, which are selected in the Bus Assign page (Figure 12-
3).
<OSC to TB>
The oscillator signal is routed to the TB Bus and replaces the TB signal.
FREQ eld
If the oscillator is set to SINE the Encoder adjusts the Frequency in the range 20 Hz – 20kHz.
BUS ASSIGN eld
Its {VST cong button} opens the Buss Assign page (see Figure 12-3).
GAIN eld
Encoder adjusts the oscillator level in the Range – inf to +12 dB. {ON} enables the oscillator.
OSC OUT eld
Its {VST cong button} opens the output patch conguration page (see Figure 12-4).
Figure 12-3: Bus Assign Page.