Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 1 - 7
Miscellaneous
Connection from local rack to stagebox
Standard t: Cat 5e Neutrik Etherex cable ZNK CT2672601.
Optional: Fibre Optical interface card with 150 or 200m cable (additional cost).
Max distance, local rack to stagebox:
80m using exible reel-mounted Cat5 cable (Neutrik Etherex only, part number ZNK CT2672601)
130m using Cat7 permanent installation cable (Amp Netconnect 600MHz PiMF, part no. 57893-x).
1500m using a single run of multimode 50/125 optical bre.
600m using 3 X 200m reels of multimode 50/125 optical bre joined in series.
GPIO facility
• 16 GPIO inputs and outputs on the local rack
• 8 GPIO inputs and outputs on the stagebox (All outputs are relay contact closure)
MIDI
• 1 MIDI Input and 2 MIDI Outputs on rear of control surface.
Channel Processing
Inputs
• Analogue gain (remote control of stagebox or local mic preamp)
• Digital Gain Trim (+18/-36dB)
• Delay (0-100ms)
• HPF, LPF (variable 20-600Hz and 1-20kHz)
• 4-band fully parametric EQ, shelf mode on HF/LF.
• Compressor (variable threshold, attack, release, ratio, makeup gain with ‘auto’ mode)
• Limiter (variable threshold, attack, release)
• Gate or De-Esser. Gate switchable to ducker.
• Insert point for external processing.
• Pan – LR or LCR switchable.
• Direct Output, patchable to any I/O and with selectable tap-off point.
Outputs
• HPF (variable 20-600Hz)
• 4-band fully parametric EQ, shelf mode on HF/LF.
• Compressor
• Limiter
• Delay (0-1sec)
• Insert point for external processing.
• Pan (Output bus to LCR) – LR or LCR switchable.
• Bus Feed feature – allows switched routing of one bus to another.
• Graphic EQ 1/3-octave (with FX Card)
• Assignable Lexicon Multi-FX processors x8 (with FX Card)