Operation Manual

Soundcraft Vi Series™ User Guide 1112Page 15 - 2
FRONT PANEL DISPLAY AND CONTROLS
The Cues of the currently-loaded show are displayed in the Cue List displayed on the master screen (see
Figure 15-2). The Show’s title is also displayed.
Figure 15-2: Cue List.
The Snapshot/Cue keys (see Figure 15-3) are used as described below.
Figure 15-3: Front Panel Snapshot/Cue Controls.
SETUP
The [SETUP] key causes the Setup page to be displayed on the master screen, see Figure 15-4.
DATA Socket
This accepts a USB data storage device. There are three data sockets on the console: the other two are
located on the rear panel.
STORE
Pressing [STORE] will record the console’s current settings into a new cue.
UNDO
Pressing [UNDO] will undo the effect of pressing [RECALL], [NEXT] or [LAST]. It is useful if any of these 3
keys get pressed by mistake, and if the console’s previous settings, which will get overwritten, are needed
and have not yet been recorded into a cue.
Cue List