Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 15 - 21
CUE LIST PAGE - MIDI Field Touched & Event List Open
Figure 15-16: MIDI Field Touched & Event List Open.
Pressing the sub-page key in the EVENT NUMBER VST eld opens the Events sub-page, which is displayed
to the left of the Cue List.
Note that the events will be transmitted in the order that they appear in the list (i.e. No.1 rst), although
the speed of transmission of all 20 events is almost simultaneous. However the order can be important:
if, for example, you wish to locate a playback machine to a timecode value and then start it playing the
Locate command must be placed before the Play command.
The page gives visibility of all of the MIDI out events that have been set up for the currently selected Cue
(up to 20 events).
The {SCROLL CUE LIST} encoder can be used to scroll through the Cue List whilst the Events sub-page is
open. In this way it is easy to compare the MIDI Event setups for different Cues.
If more than 20 Events are necessary, the Sequencer function (see page 15-13) can be used to ‘chain’
two or more Cues together from a single Recall command.
The sub-page is closed again by pressing the sub-page key (there is no Exit button).