Operation Manual
Soundcraft Vi Series™ User Guide 1112Page 15 - 26
MANAGING SHOWS
Loading Shows, copying Shows to and from USB data storage devices, and creating new Shows is done
from the following page. It is reached by pressing [MENU] and then the <SHOW> tab at the top of the
page (or the Show name at the top of the Cue List display area, which is at the top right corner of the main
screen, can be touched).
Figure 15-19: The Show Page
Note that the Show page appears as shown in Figure 15-19 if a USB data storage device is present in the
USB slot. If there isn’t any external memory, the right-hand side of the screen is blank, and the Export/
Import Controls are not shown. Up to 3 external storage devices can be connected: if more than one
is detected, additional buttons will appear to the right of the <EXT1> button, and pressing the required
button will select that device.
Flash Drive
The left-hand side of the page displays the shows which are present on the console’s ash drive. The up
and down-arrows on the touch screen are used to scroll though the available Show titles. Pressing and
holding the arrow keys scrolls at a higher speed. Once the required show has been highlighted, in the
double-height yellow-outlined box, the three buttons on the left can be used as follows:
The <LOAD> button will load the selected Show into the console (note that the currently-loaded
show’s title is shown in yellow text above the list).
The <NAME> button allows the user to name/rename the show, the on-screen keyboard is
displayed.
The<DEL> button deletes the show from the ash drive (note that the currently-loaded show
cannot be deleted). A conrmation dialogue is displayed.