Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 15 - 29
All parameters in the menu/settings page.
Follow Solo switches.
Mute Group Master switch status.
Settings Recorded Within Audio Settings
This applies to the Show Snapshot and to any standard Cues.
All Channel* audio settings on the console: Channel ON; Fader positions; Pan; Channel Parameters (EQ/
Dynamics/input/output/ insert).
All Channel Bus assigns, levels, Pre/Post states and Channel Labels.
All Channel Patch settings.
All I/O controls.
*A ‘channel’ is an input, output or Master LRC channel.
Settings Not Recorded
PFL/SOLO switch status.
LRC Sel switch status.
All round Setup switch status.
User Dened switches (O/P fdr pnl) status.
All switches in Snapshot Control section.
Copy/Paste/Undo switch status.
Set Pre/Post modes switch status.
Pan/Level toggle switch status.
Upper & Lower Encoder Row Assign switches status.
Gang Mode switch status.
Solo Clear switch status.
Settings Restored To Their State At the Last Power-Down
Which Show was loaded.
LOAD ISO WITH SHOW switch status.
Show Compatibility
Vi2, Vi4 and Vi6 Consoles
From software V4.7, all shows are compatible between all Vi2, Vi4 and Vi6 consoles. running V4.7.
Previous to V4.7, shows saved ony Vi console (including Vi1) can be loaded on any Vi2/4/6. All settings
will be recalled except for the channel pairing, which is not imported due to the differing vertical
arrangement of channels in the fader pages.
When using les from a Vi6 on a Vi4 congured for 64 inputs or less, or a Vi1, some data in user layers
may be lost because of the lower I/O conguration.