Operation Manual
Soundcraft Vi Series™ User Guide 1112 Page 16 - 1
GPIO
CONFIGURATION
In the GPIO (General Purpose Input Output) Page you can congure all GPIO channels that are available
in the Soundcraft Vi Series™. To access the GPIO page, press the [MENU] key, this opens the Main menu
page on the master section screen, then touch the <GPIO> tab (see also chapter 14).
Figure 16-1: GPIO Page.
The scrollable tables show the conguration of the GPIO channels. The conguration is done via the VST
elds. The selections made via the VST keys and encoders are reected in the tables on the screen.
For each GPIO channel, the polarity, time (outputs only) and edge can be congured, to make it easy to
interface directly to different device types.
Screen Touch-Pads
<LOCAL RACK>
Selects the GPIO in the Local Rack (16 GPIO channels).
<STAGE BOX>
Selects the GPIO in the Stage Box (8 GPIO).
Up and Down Arrows
The pair of Up and Down Arrows are used to scroll though the two lists. The currently-selected input and
output channels are outlined in yellow. GP Inputs are displayed in blue, and GP Outputs are displayed in
red.