Operation Manual

Soundcraft Vi Series™ User Guide 1112Page 18 - 4
CHANNEL COPY: ITEMS NOT INCLUDED IN COPY WITH SEL BUTTON
Input 1/2 switch
Input 1 & 2 patch
Mic Input Gain
All associated switches (48V, PAD, Phase Inv etc)
Insert Point – all aspects
Direct Output – all aspects
Fader and Mute
VCA & Mute Group Assignment
FX settings
BUS OUTPUT COPY: ITEMS NOT INCLUDED IN COPY WITH SEL BUTTON
Output patch
Insert Point – all aspects
FX settings
Note that the Aux send levels (or routing switch status for Groups) from input channels to a bus
also always copied when the bus master is copied, but you can choose whether to paste the
sends or not using the {INCLUDE SEND LEVELS} key in Paste mode.
EXAMPLE: COPYING A WHOLE CHANNEL, INCLUDING THE ‘IN1 PATCH’ PA-
RAMETER
. Press [COPY] to enter Copy Mode
. Press [Solo/SEL] button on required input channel to select it to the clipboard.
. Touch the Input touch eld on the channel strip with a long press (2s) to enter the ‘zoom’
mode for the input parameters. Notice that only the Trim, Filters and Delay parameter are already
selected (indicated by yellow text).
. Touch the encoder (or press the adjacent Vistonics button) in the IN1 PATCH eld to add
the patch parameter to the copied items.
(the IN1 PATCH text changes to yellow to indicate selection)
. Press PASTE and select the destination channel(s) to paste the selected channel includ-
ing the patch setting.