Operation Manual

Soundcraft Vi Series™ User Guide 1112Page 20 - 22
When a <GEQ Field> is touched, the lower part of the master bay’s screen appears as shown in Figure
21-19.
Figure 21-19: Lower Part Of The Master Bay’s Screen in Graphic EQ Mode showing cut/boost in
Vistonics area when fader is touched.
There are three controls available on this screen:
Width (Q or BWOct)
This allows the operation of the bandwidth controls in the EQ sections throughout the console to be
selected as either Octaves or Q-factor. The direction of the control is reversed between the two settings: In
Q mode, clockwise narrows bandwidth, in Octaves mode, clockwise widens bandwidth. Settings are saved
in the Show le.
Figure 21-18: Master Bay With An Output Bus Soloed.