Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 21 - 3
TC Display {ON} key. When switched on, the incoming MIDI timecode value and its automatically detected
frame rate is displayed instead of the show name on the main page in the control bay screen.
MIDI OUT: The red area of the screen controls parameters relating to MIDI output.
ON button: works as a global enable buttons for the 2x MIDI OUTs – when this button is off, no
transmission is possible from either of the MIDI OUTs.
GLOBAL TX CHAN VST Encoder : Sets the Global Transmit MIDI Channel for the console.
This is not used currently but may be used for future functionality such as the transmission of MIDI
messages from the faders and other desk controls.
Values Range : Off, Out1:1-16, Out2:1-16.
Default value: Off.
All parameters in the Menu\MIDI page are stored in the current Show!
Main Menu –MIDI page open & TX Channel list selected
Figure 22-2: MIDI TX Channels.
Showing the Device List with the Transmit Channels button selected.
The NAME sub-page button opens the QWERTY keyboard and allows the default Device names to be
edited.
The unedited names have the format:
OUT1: Channel 1
OUT1: Channel 2
|
V
OUT2: Channel 16