Operation Manual

Soundcraft Vi Series™ User Guide Page 23 - 31
D21m System
6-18 D21m Modules Date printed: 30.08.07
16-Ch Mode (Default Setting)
8-Ch Mode
LEDs: IN CH 1-8, 9-16 These LEDs indicate that valid ADAT signals are available at the respective
inputs.
Jumper: 8/16 Ch Mode It is possible to restrict the number of channels from 16 to 8 using this
jumper.
IN/OUT CH 1-8
Jumper Setting Channels on Backplane Interface 1 Interface 2
16-Ch Mode
(factory default)
16 in, 16 out
48 kHz: Ch 1...8 48 kHz: Ch 9...16
96 kHz: Ch 1...4 96 kHz: Ch 5...8
8-Ch Mode 8 in, 8 out
48 kHz: Ch 1...8 48 kHz: unused
96 kHz: Ch 1...4 96 kHz: Ch 5...8