Operation Manual

Soundcraft Vi Series™ User Guide 1112Page 25 - 4
Identifying the HiQnet Network connector on Vi consoles
Vi1
The HiQnet port is on the rear of the control surface, adjacent to the rear USB sockets.
Important! The HiQnet port on early Vi1 consoles (serial numbers lower than 30210956) is only able
to drive short cable lengths, max recommended length 1 metre (3 feet). Therefore use a network switch
positioned close to the rear of the console to extend the cable length if required.
Vi2/Vi4 /Vi6
The HiQnet port is located on the rear of the Control Surface, adjacent to the MIDI ports. The port is
capable of driving standard Ethernet distances of up to 100m.