Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 25 - 9
Associating the Microphones with Audio Connectors
Use the MAP DEVICES Vistonics control to scroll the list and select a microphone, then press the AUDIO
PATCH button to open the patching matrix.
The patching matrix allows all of the physical input connectors available within the Vi system to be seen
and the relevant connector to be chosen to correspond to where the currently selected microphone is
connected. The chosen connector is shown in bright blue highlight, whereas connectors that are already
associated with other AKG devices are shown as greyed-out.
A greyed-out connector can still be chosen as an assignment for the currently selected microphone, but a
dialogue box will appear in this case to ask if you wish to reassign this connector.
Hint: To avoid opening and closing the Audio Patch page, the MAP DEVICES encoder can still be used to
scroll through the Device List even whilst the Audio Patch page is still open. The name (truncated) of the
currently selected Device can be seen in above the MAP DEVICES Vistonics scroll encoder.
When all the assignments have been made, close the Audio Patch page by pressing EXIT button on the
screen, or pressing the Vistonics button in the AUDIO PATCH control eld.
Returning to the Device List, you should now have a list of devices with all three columns indicating
information in this format:
AKG Device name Hub4000Q Audio Patch assignment
node address