Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 25 - 11
In more detail, the elements that are added to the input channel overview are as follows:
The displayed Microphone monitoring elements shown on previous page provide the following functions:
Microphone Mute status indicator
Shows red ‘MUTE’ icon if the AKG mic is switched to muted state.
When unmuted, this indicator icon disappears.
Microphone Audio clipping indicator
A red ‘C’ is displayed momentarily if the audio within the wireless mic audio path reaches full scale.
Microphone RF status indicator
A red or green ‘RF’ icon is displayed to indicate the health of the AKG RF level.
A green RF indicator is displayed when the signal strength at the receiver is strong enough to enable audio
transmission. A red RF indicator is displayed when the signal strength is too low for audio transmission.
Note: If the microphone transmitter is switched off, the RF indicator will also change to red, as the system
is unable to tell the reason for the lack of RF.
The actual value in dB of the RF signal strength is displayed in the Vistonics detailed monitoring
information display (see next page).
Microphone Battery level indicator
A red or green battery level icon indicates the health of the battery within the AKG wireless transmitter.
The interior of the battery icon contains 7 segments showing varying battery level. The colour coding of the
battery icon is as follows:
Green Segments 3-7 35-100% remaining
Amber Segment 2 25% remaining
Red Segments 0-1 1 hour remaining
The number of hours remaining in the transmitter battery is displayed in the Vistonics detailed monitoring
information display (see next page) and varies with the type of battery used.
Microphone
Mute indicator
Microphone audio
clipping indicator
Microphone RF
status indicator
Microphone Battery
level indicator