Operation Manual
Soundcraft Vi Series™ User Guide 1112Page 25 - 16
FAQ 1: How do I setup my HUB 4000 Q(s) and my wireless system together
with System Architect/AKG Wireless iPhone App?
See Quick Start Guide steps 1 - 3 and FAQs.
FAQ 2-1: System Architect starts up and no HUB 4000Q is detected!
If the HUB 4000 Q is not showing up at HiQnet Explorer, System Architect has no
network connection to the HUB 4000 Q.
Possible reasons:
-
The HUB is physically not connected to the HiQnet network
check your ethernet/network cables and check if your router and/or switches
are powered on
If you connect the HUB 4000 Q directly to your PC than you have to use a
crossover network cable
-
The HUB 4000 Q is not powered on
check the power connection of the HUB 4000 Q
-
The HUB 4000 Q has no or wrong IP address/subnet settings
See FAQ 3
FAQ 2-2: AKG Wireless iPhone App shows no list entries/devices at it‘s main
list screen!
See FAQ 2-1
FAQ 2-3: Soundcraft Vi console VM2 shows no list entries/devices at it‘s
HiQnet list screen!
See FAQ 2-1
FAQ 2-4: What are the minimum requirements for a PC running System
Architect?
- Windows 7, Windows Vista, Windows XP SP2, Windows 2000 SP4 or Windows
2003 Server SP1, Windows 7
- Only 32 bit Windows operating systems are supported
- Processor - 2 GHz (Dual Core)
- RAM - 2 GB
- Screen Resolution - 1024x768
- 200 MB Hard Drive space available
April 2011 Page 2
HUB4000Q–FAQ