Operation Manual
Soundcraft Vi Series™ User Guide 1112Page 25 - 18
-
Now the HUB 4000 Q should have a valid IP address
The data LED is showing the network traffic (it should blink
non periodically and very fast)
The slot LEDs are ON if a AKG Device is connected
-
If the HUB 4000 Q has a valid IP address, the Readdress Network panel
should show up a new entry with your HUB 4000 Q because System Architect
has now a network connection to the HUB 4000 Q
o
If the new entry has also entries at columns ‘Type’ and a ‘Description’ the
network is configured right (see following picture).
o
You can now start working with System Architect/AKG Wireless
iPhone App, VM2, HUB 4000 Q and the AKG wireless system.
o
If the new entry has NO entries at columns ‘Type’ and a ‘Description’ the
IP address and subnet settings of the HUB 4000 Q are wrong.
Please follow the next steps:
- Double click on the list entry or click the Configure Button at the bottom of the
Readdress Devices panel:
-
- The Configure Device Dialog is opened. At this example the Device has the IP
address 169.2.1.52 and is in the subnet 255.255.0.0. The computer has in
this example the IP address 192.168.1.1 and the subnet 255.255.255.0.
April 2011 Page 4
HUB4000Q–FAQ