Operation Manual
Soundcraft Vi Series™ User Guide 1112Page 25 - 20
FAQ 6-1: What IP address is used by the HUB 4000 Q?
The IP address negotiation of the HUB 4000 Q depends on the DIP switch setting of
the HUB 4000 Q. Also see FAQ 6-2, 6-3, 6-4, 6-5.
DIP switch settings:
On the right side of the HUB 4000 Q, behind the AKG logo, a DIP switch can be found
which changes the IP address negotiation. DIP switch changes take only effect after
the HUB is power cycled. It is recommended to use the default DIP switch setting (all
switches OFF). This setting uses the stored IP address setting.
Configuration 1:
ON
DIP 1, 2, 3, 4: OFF
Default, recommended configuration:
-
Use stored settings – Uses System Architect settings
-
At shipping – first start up: DHCP & AutoIP
Configuration 2:
ON
DIP 1, 2: ON - DIP 3, 4: OFF
-
DHCP & AutoIP – Overrules System Architect setting
Configuration 3:
ON
DIP 1, 2, 3: ON - DIP 4: OFF
-
DHCP only – Overrules System Architect settings
Configuration 4:
ON
April 2011 Page 6
HUB4000Q–FAQ