Operation Manual

Soundcraft Vi Series™ User Guide 1112Page 25 - 22
EXAMPLE: The following example shows a HiQnet system with a PC running System
Architect, a router (DHCP turned off) and one HUB 4000 Q. The PC is in the right
subnet but it‘s IP address is configured wrong. System Architect will not discover the
HUB 4000 Q because there is no proper network connection between the PC and the
HUB 4000 Q. The IP address of the PC should be 192.168.0.10. Then the PC would
be configured right.
FAQ 6-3: Do i need to configure my Windows firewall?
It is recommended to switch of your Windows firewall.
FAQ 6-4: How do i setup my network router?
Normally you can do this within your internet browser by typing in the IP address of
your wireless router in the adress bar of internet explorer. By default most router use
the IP address 192.168.0.1.
Please refer to the documentation/manual of your network router.
Router (DHCP)
IP adress: 192.168.0.1
Subnet: 255.255.255.0
HUB 4000 Q 'Hub 1'
IP adress: 192.168.0.21
Subnet: 255.255.255.0
HUB 4000 Q 'Hub 2'
IP adress: 192.168.0.22
Subnet: 255.255.255.0
PC
IP adress: 192.168.0.3
Subnet: 255.255.255.0
Router (NO DHCP)
IP adress: 192.168.0.1
Subnet: 255.255.255.0
HUB 4000 Q 'Hub 2'
IP adress: 192.168.0.22
Subnet: 255.255.255.0
PC
IP adress: 172.168.1.133
Subnet: 255.255.255.0
April 2011 Page 8
HUB4000Q–FAQ