Operation Manual
Soundcraft Vi Series™ User Guide 1112 Page 25 - 23
FAQ 6-5: How should i configure my network?
There are multiple possible configurations which are possible. The three most common
configurations are:
1 - PC, multiple HUB 4000 Qs, DHCP router
This is the recommended configuration. The PC is connected via a network router with
DHCP to the multiple HUB 4000 Qs. The network router takes care of the IP address
and subnet settings of the PC and HUB 4000 Qs.
Make sure that the PC and the HUB 4000 Qs are configured to receive IP settings via
DHCP.
See FAQ 3, 5, 6-1, 6-2, 6-4, 14.
Router (DHCP)
IP adress: 192.168.0.1
Subnet: 255.255.255.0
HUB 4000 Q 'Hub 1'
IP adress: 192.168.0.21
Subnet: 255.255.255.0
HUB 4000 Q 'Hub 2'
IP adress: 192.168.0.22
Subnet: 255.255.255.0
PC
IP adress: 192.168.0.3
Subnet: 255.255.255.0
2 - PC, multiple HUB 4000 Qs, network switch
The PC is connected via a network switch to the multiple HUB 4000 Qs. The network
settings must be set manually at the PC and HUB 4000 Qs.
Make sure that the PC and the HUB 4000 Qs have the right IP settings.
See FAQ 3, 5, 6-1, 6-2, 6-4, 14.
Switch
HUB 4000 Q 'Hub 1'
IP adress: 192.168.0.21
Subnet: 255.255.255.0
HUB 4000 Q 'Hub 2'
IP adress: 192.168.0.22
Subnet: 255.255.255.0
PC
IP adress: 192.168.0.3
Subnet: 255.255.255.0
April 2011 Page 9
HUB4000Q–FAQ