Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 3 - 5
Channel Labels
By default the channels are labelled CH-1 to CH-96.
Soundcraft Vi Series™ uses long labels for the Screens and short labels for the LCDs. Long labels can
contain up to 10 characters, whereas short labels are restricted to 6 characters.
Figure 3-4: The Channel Label Page.
Changing The Channel Label
* Press the <INPUT> touch eld to open the Input Page.
* Enter the channel label page by pressing {CH LABEL} on the Input Page.
* Type the long name (only valid characters are possible).
* Adjust the short name if necessary by touching the <Short Label> on the screen or by using
<TAB>.
* Pressing backspace twice while in the short label eld will copy the long lable into the short
label eld, with characters in red indicating that they will not be displayed.
* Leave the page with <ENTER>, or by pressing {CH LABEL} again.
<TAB> toggles the cursor between long and short elds.