Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 4 - 7
STEREO CONFIGURATION
Pairing of input channels
Figure 4-7: The Pairing Page.
The available channels on the two xed Layers A (upper row) and B (lower row) are displayed on the touch
screen.
Pairing candidates are the unused left and right neighbours and the vertical neighbour in the same Bay.
Existing Pairings will be shown greyed out. It is not possible to pair with a channel in the next bay.
HINT: Selecting an input channel [SOLO/SEL] moves this page to the desired channel in the correspond-
ing bay.
Pair An input Channel
* Enter the pairing page by pressing {PAIRING} in the Input Page, all possible pairing candi-
dates will be shown.
* Select the desired pairing candidate, all channel parameters will be copied to the paring can-
didate, links will be set. The meter overview in Master screen shows the pairing information
* Optionally change the copy direction with <FROM>, <TO>.
* Leave the page with {EXIT} or {PAIRING}.
HINT: If a destination candidate is used in another pair you must rst release that pairing.