Operation Manual

Soundcraft Vi Series™ User Guide 1112Page 4 - 10
Equaliser Band Highlight
If you touch one or more parameter encoders, the corresponding Equaliser band(s) will be indicated by
the red overall graph being overwritten with a white graph that represents only the touched band(s). This
is useful for identifying which part of a curve is associated with which EQ bands. The representation will
return to the default when you leave the page.
Figure 4-9: The Equaliser Page After Touching An LF Encoder.
BAND Field
All four bands contain a GAIN, FREQ, Q encoder and an IN switch.
GAIN
Encoder adjusts the Gain in the range +/- 18 dB. {IN} enables the Equaliser band.
FREQ
Encoder adjusts the frequency in the range 20 Hz .. 20 kHz.
Q
This control may be set to operate as Q or BANDWIDTH in the SETTINGS menu. These settings are saved in
the show le.