Operation Manual
Soundcraft Vi Series™ User Guide 1112Page 4 - 16
BUS
Figure 4-12: The Bus Page.
General
The rst Bus page contains the controls for busses 1-16, while the second page contains the controls for
busses 17-32.
What these elds look like depends on the Bus conguration.
AUX (Mono)
Encoder adjusts the send level to this BUS. Pre indicates the PRE/post state. {ON} enables the send.
AUX (Stereo)
Left Encoder adjusts the send level to both busses, while the right encoder adjusts the pan to these bus-
ses.
HINT: If the channel is paired, the right encoder adjusts the Balance to the Busses. If the ‘follow channel
pan’ option was activated in the bus conguration, there will be no function on the right encoder.
PRE indicates the pre/post state. {ON} enables the send.
GRP (Mono)
{ON} routes the signal to this bus.
GRP (Stereo)
{ON} route the signals to both busses.
Empty
If a bus has been congured as a Matrix, it is not visible in this page.