Operation Manual

Soundcraft Vi Series™ User Guide 1112Page 4 - 18
PAN Function LCR Mode
If the Pan MODE is set to LCR an additional WIDTH eld is displayed. (If the channel is paired, it is not
possible to set the PAN mode to LCR.)
Figure 4-14: The Panning Section In LCR Mode.
PAN Field
Displays the pan setting. Encoder sets the channel pan to the three masters. See Audio Format / Pan /
Panning on pages 4-17 & 4-18.
WIDTH Field
In LCR mode, the encoder adjusts the level of an additional amount of signal sent to both left and right
outputs.
MASTER LCR
{ON} routes the channel signal to the Left, Right and Centre masters.