Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 5 - 1

OUTPUTS

SIGNAL FLOW

Figure 5-1: The Signal Flow In An LRC Master Or A BUS Master.

Only one of the three possible insert points can be used per master at any time.

8 Output

Signal Flow

The picture shows the signal flow in an LRC Master or an MIX Master

Only one of the 32 MIX BUS and three masters is shown in the drawing.

• PP Insert Point* pre processing insert point

• Equaliser 4 band parametric Equaliser

• Dynamic Compressor/Limiter

• PF Insert Point* Pre-fader Insert Point

• Fader master fader

• ON master on/off

• AF Insert Point* After-fader Insert Point

• Hi-Pass variable frequency high-pass filter

• Delay long delay 1 mS - 5 Sec.

• Insert Send with Trim

* Only one of the three insert points can be used per master at any time.