Operation Manual

Soundcraft Vi Series™ User Guide 1112Page 5 - 2
GENERAL
The LR and C Masters are always operated with their dedicated master fader strips in the master bay.
The parameters of these busses are controlled via the Master Processing Page (see Figure 5-2).
The Soundcraft Vi Series™ allows three different ways to access, control the level of , and change the
parameters of, the other 32 output busses. These are:
via the Master Bay’s Output Strips, and selecting the fader page* required,
via all of the Input Strips, using the [ALL BUSSES] key,
via the Vistonics™ buttons and encoders on the master section screen.
* For detailed information about Layering see chapter 8.