Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 5 - 5
MASTER BAY OUTPUT STRIPS
The rst way of controlling and changing the parameters of the 32 output busses described earlier is as follows.
Figure 5-3. A Master Bay Strip.
In order to select the desired output from the 32 possible choices, the correct fader page, A-D, must rst
be assigned to the master bay (see Figure 8-5 for the keys). Once this is done, the user can select the
desired fader to control the output level, and pressing its [SOLO/SEL] key opens the processing Area in
the Master screen (see Figure 5-4).
HINT: [METER LOCK] must be off, otherwise the processing strip will not be displayed. If multiple
Output Solo are activated the processing for the last-pressed Master Solo is displayed.
processing
Level Meter &
Gain Reduction Meter
[ON] Bus
[Isolate]
[SOLO/SEL]
Short Bus LABEL
FADER
FaderGlow™
MUTE/VCA display
[Function]
MUTE safe indication
Aux 1 Aux 2 Aux 3 Aux 6 Aux 7 Aux 8Aux 4 Aux 5