Operation Manual

Soundcraft Vi Series™ User Guide 1112 Page 7 - 3
CHANNEL VST ENCODER 1& 2
Figure 7-3: Default VST Encoders 1 & 2 For Input Bay.
VST Encoder Priority
If a higher priority assignment action occurs, VST encoder functions change immediately to this mapping.
The priority order of the possible assignment actions is:
Priority Function
highest CHANNEL EXPANDED FUNCTION (e.g.: EQ, Dynamics, etc)
FOLLOW OUTPUT SOLO
FAST ASSIGN
lowest USER or DEFAULT
HINT: If any touch eld is activated, the 16 VST encoders are assigned with expanded channel function
parameters (see Chapter 4 for full details).
By default, the VST encoders 1 & 2 are assigned as AUX 1 and AUX 2 send level controls for their input
channels.
126
VST Encoder 1& 2
Picture shows the default input bay view
HINT
If a touch field is activated, the 16 encoders are assigned with the expanded channel function
parameters.
By default, the encoders 1 & 2 are assigned with channel related functions. This means each
pair (encoder 1 & encoder 2) is a member of the vertically aligned channel strip.
In the example above they act as AUX 1 and AUX 2 send level encoders for this input
channel.
The function assigned to the encoders can be easily set by the user.
Channel Encoders
Channel encoders always work as member of the vertically aligned channel strip. In the
example on the previous page it acts as the Input GAIN encoder.