DSF3 MKII Owners Manual

SoundField DSF-3
User Guide
Controls
Page 6
Orientation Page
1. Rotate
Rotates the microphone’s pick up through a full horizontal 360º in 10º steps and redefines the
front centre of the stereo and surround image.
To change the rotation press the “Rotate” button - this will change the display to show the angle of
rotation in the middle of the screen – and use the rotary controller to alter the rotation.
To return back to the main screen either press the “Rotate” button again or wait for the gain screen to
automatically time out.
2. Zoom
Zoom allows you to focus in on the front or the rear of the microphone.
To change the zoom press the “Zoom” button - this will change the display to show the amount of
zoom in the middle of the screen – and use the rotary controller to alter the rotation.
To return back to the main screen either press the “Zoom” button again or wait for the gain screen to
automatically time out.
3. Front and Rear Tilt
Tilt allows you to tilt the microphone up or down by +/- 45º. There are individual tilts for the
front and the rear channels of the surround outputs to accommodate an umbrella effect, where
both the front and the rear of the microphone is in essence tilted downwards.
To change the front and rear tilt press the “Fr Ht or Re Ht” button - this will change the display to
show the angle of tilt in the middle of the screen – and use the rotary controller to alter the tilt.
To return back to the main screen either press the “Fr Ht or Re Ht” button again or wait for the gain
screen to automatically time out.