Safety Information 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
For compatibility between the SFQ-01A system and another device with Bluetooth technology, consult the device's documentation and dealer. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. CAUTION - Proper Installation Bluetooth is a registered trademark of Bluetooth SIG, Inc Please read rating label at the bottom of system for power input and other safety information.
Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the Attention: applicable collection point for This symbol is only valid in the the recycling in accordance European Union. with your national legislation.
Contents Getting Started 5 Package Contents 5 Installing/Replacing the Batteries 5 Connecting the AC Adapter 6 Using the Remote Control 7 System Overview 8 Front View Back View Remote Control 8 Selecting the Sound Source 9 Playing back from iPhone/iPod 10 Setting an iPhone/iPod on the Unit 10 Listening to an iPhone/iPod Charging an iPhone/iPod 10 Playing back via Bluetooth/from iPad 12 Downloading the SoundFreaq App 12 Using Multiple Bluetooth Devices 13 Playing Back from Macbook
Getting Started Package Contents Examine whether the following package contents are all included: + CR2025 3V Lithium Coin Battery CR2025 Remote Control It is loaded on the remote control at the factory. Adapter Cable Main Unit Switch Power Adapter Dock Adapters(2) For iPhone 3G/3GS and iPod Touch Installing/Replacing the Batteries Handling the Remote Control CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 1.
Warning - When Using the Battery Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short circuit, disassemble, heat the battery, or dispose the battery in fire. Doing any of these things may cause the battery to give off heat, crack, or start a fire. Do not leave the battery with other metallic materials. Doing this may cause the battery to give off heat, crack, or start a fire.
Using the Remote Control Using the remote control Storing the remote control Remove the insulation sheet before using for the first time. Aim the remote control at the IR Sensor on the front lens within an approximate distance of 7m (23 feet) away. A remote control storage compartment is designed on the right side of system. The remote control can be magnetized into the compartment easily for your quick and convenient use. Push here. IR Sensor Remote control magnet Open the door. .7.
System Overview Front View Back View 5 13 4 10 9 1 2 16 3 14 6 7 8 11 15 12 1. U-Cubed knob Turn to activate or deactivate the U-Cubed (High Definition Wide Stereo) sound effect. 2. Bass knob Turn to adjust a desired bass effect ranged from +3 to -3. 3. Treble knob Turn to adjust a desired treble effect ranged from +3 to -3. 4. 30-pin Apple connector Connect with iPhone/iPod. 5. Pair indicator To indicate when building a wireless audio connection 6.
Remote Control 1. 2. 1 2 3. 3 4 5 6 7 4. 5. 6. 7. (Power) button Switch between power-on and standby modes. (Previous) / (Next) button Skip to the previous/next track in iPhone/ iPod and wireless audio modes. Hold the button to fast-backward/fast-forward a track. (Play/Pause) button Play/pause a track when listening to iPhone/ iPod or wireless audio source. Hold to switch the iPod to sleep mode. Note: When the unit is building a wireless audio with an iPad, this button is disabled.
Playing back from iPhone/iPod Setting an iPhone/iPod on the Unit Compatible iPod Players: Most Apple iPod models with 30-pin dock connectors as follows: iPod nano 5th generation (video camera), iPod nano 4th generation (video), iPod nano 3rd generation (video), iPod nano 2nd generation (aluminum), iPod nano 1st generation, iPod 4th generation (color display), iPhone 3G/3GS, iPhone 4, iPod classic, iPod 5th generation (video), iPod 4th generation, iPod touch 1st generation, iPod touch 2nd generation, iPhone,
Press the Button / Unit Remote Control Functions Start/Pause playback. Hold this button to switch the iPod to sleep mode. Next track/fast forward (press and hold). Previous track/rewind (press and hold). Charging an iPhone/iPod The iPhone/iPod is charged while it is set on the unit when the unit is powered on. The unit does not support iPod 3G (10/15/20 /30/40GB) charging mode. Make sure the AC adapter is connected to the unit.
Playing back via Bluetooth/from iPad Downloading the SoundFreaq App We have developed an App to give you full control from your iPhone/iPad while playing audio over the Bluetooth wireless connection, please download the "SoundFreaq Remote" App for FREE. After you build a Bluetooth connection between your iPhone/iPad and the Sound Platform, a prompt will be displayed on your iPhone/iPad asking you if you would like to install our App, click "Yes" to install the APP.
Please check the user manual of the iPad or Bluetooth-enabled device with which you are initiating pair to learn about Bluetooth connection with any other devices. 4. Once the unit is detected and its name "Sound Platform" appears on the display of your iPad or Bluetooth-enabled device, key in the default password "1234" if a prompt requests it. You may change the device name on your Bluetooth-enabled device after the pair is successfully set up.
Playing back from External Source Listening to an External Audio Device, Digital Music Player or Any Other Audio Source Connect an external device to the AUX IN jack on the back panel of the unit using a stereo mini plug cord (not supplied). 1. Turn the unit power on. 2. Set the volume to the minimum position. 3. Select AUX mode with the SOURCE button. Back Panel LCD Display 4. Start playback on the external device. 5. Adjust the volume level to the level that you want to listen to.
Troubleshooting Check this list for a possible troubleshooting solution before calling for service. In These Cases Check the following points Power does not come on. • AC adapter is not inserted securely. Plug in securely. Cannot set the iPhone/iPod. • Is the selected dock adapter compatible to your iPhone/iPod? • Is the dock adapter properly mounted on the unit? Make sure to mount the dock adapter properly. Cannot operate iPhone/iPod.
Technical Specifications SFQ-01A Model Type Sound Platform Support Bluetooth Bluetooth 1.2, 2.0 and 2.1 compliant Support Profile A2DP Input Sensitivity/Impedance AUX Input Input Terminal External DC IN (for AC adapter), AUX IN Power Source DC 18 V AC Adapter 1200 mV 3.3 A (External DC IN) Input: AC 100-240V, 50/60Hz Output: DC 18 V 3.3 A Dimensions (Approx.) 320mm (W) * 168mm (H) * 154mm (D) Weight 2.01Kg (including receiver) .16.
Save this manual
