Dear user: Thank you for choosing CUBE Mini True Wireless Stereo Speaker. This user manual contains mandatory safety guides, declaration, warranty policy and CE declaration of conformity. To ensure your safety, we recommend reading this manual thoroughly before use and keep it in a safe place for future reference. I. CUBE Mini True Wireless Stereo Speaker Specification 1. Power supply: Main power: DC 24V/2.5A Battery-powered: 2600mAh Li-ion battery 2. Max. output power: 50W 3.
III. Buttons and Functions Input Select On Reset TWS Pairing Broadcast Audio Input indicator TWS /multi-device wireless connection pairing indicator AUX Optical USB ·3.
Long-press at the same time to enter TWS pairing Long-press to disconnect Bluetooth connection Short-press to activate battery sound notification Reset Broadcast Short pressed the pinhole button to reset speaker (power off) Short pressed the pinhole button to activate/deactivate multi-device wireless connection mode IV. Accessories: The package encloses CUBE Mini True Wireless Stereo Speaker *1 Power supply *1/ Power cord *1/ Remote control *1/ Bag *1/ User manual *1。 (1) Power supply DC 24V/2.
Previous song Next song (when input from USB and Bluetooth) (when input from USB and Bluetooth) USB USB input WiFi Wi-Fi input WPS WPS pairing STD Standard sound mode BASS (available for CUBE Mini Pro only) (available for CUBE Mini Pro only) Enhanced bass mode (it is recommended to put speakers near the wall to get a natural-enhanced bass effect) (3) Bag: A convenient bag to prevent your CUBE Mini speaker from damage when carrying out. Put in with protective foam to protect speakers. V.
d. Connect by Bluetooth/USB/optical/stereo 3.5mm cables and switch the input by panel button/remote control/SOUNDGIL application. (II) True Wireless Stereo mode pairing operation: If you have 2 CUBE Mini speakers, it is possible to use TWS mode. 1. Turn on both CUBE Mini speakers. 2. Select one CUBE Mini as the primary (default is the left channel) and connect to any audio input. Long press the buttons on the panel of primary speaker at the same time until a voice prompt sounds.
5. When disconnecting TWS connection, please long press the panel bottons on primary or secondary until TWS pairing indicator turns off and a voice prompt sounds. Recommended installation: Primary Secondary *Height: Place the speaker at the same height as your ears. 60º 60º *Angle: Put the speaker at an angle slightly to 60º the center, facing the audience. *Distance: audience It is recommended to put the speakers 2m from the audience to acquire the best effect.
Enter multi-device wireless connection mode after a voice prompt sounds. *Please clear all inputs to the secondary speaker and switch to Bluetooth mode before setting. 3. Short press Broadcast pinhole button on the panel of CUBE Mini speakers for connection with a sharp object (like a pen tip). After pairing, multi-device wireless connection indicator will turn solid white. 4.
VII. Safety precautions: (1) Correct use: When using Cube Mini portable Bluetooth speakers, follow operation instructions provided by this manual to ensure safety. DO NOT use for other than the intended purpose. Misuse could lead to property damage or personnel injury. The manufacturer or supplier is not liable for any damage or injury caused by improper use or misuse.
(4) Electrical and general safety precautions 1.Please read all safety and operation instructions thoroughly before use. 2.Please keep this manual in a safe place for future reference. 3.Please follow all instructions, precautions, and warnings in this manual to ensure your safety. 4.Avoid using the equipment near water (such as near a pool). 5.Use a dry cloth to clean the equipment. 6.Avoid installing the equipment near heat, like a heat radiator, heat accumulator, furnace, and other heating device. 7.
13.DO NOT move, drag or transport the speaker by the power cord. 14.Make sure the power cord is well-organized to avoid trip hazards. 15.DO NOT twist the power cord or place it at a sharp edge. 16.Use the stand, tray, support and leather cover enclosed in the package or designated by the original manufacturer only.When moving an equipment installing on the stand, make sure to avoid falling off to prevent damage. 17.Make sure the equipment is securely installed to avoid damage. 18.
23.Follow local regulations when disposing of battery. 24.This device is designed to be used in land areas under a height of 2,000m. Refer to Fig. 1 for the symbol. Fig 1 25.This device is designed to be used in non-tropical climates. Refer to Fig. 2 for the symbol. Fig. 2 26.Only replace with parts designated by the original manufacturer or having same functions to replace a damaged power cord or plug. 27. This device is a Class II equipment with double insulation design.
32.This equipment is recyclable. A product with this symbol should not be discarded with household waste.Please bring the equipment to a designated recycling location of the waste electrical and electronic equipment when product life ends.For more recycling location information, please check with local regulators.
CUBE Mini True Wireless Stereo Speaker www.besthifispeaker.
3.Improper battery replacement can cause personnel injury and equipment safety problems.Replace with the identical or same size battery only. 4.A swallowed battery can lead to chemical burns! 5.Make sure to keep new and old batteries out of the reach of children. 6.Please stop using the remote control if the battery chamber cover cannot be locked securely and keep it out of the reach of children. 7.Please seek medical assistance immediately If a battery is swallowed or gets into the body by accident. 8.
EN301489 RED Directive for Radio and Telecommunications Terminal Equipment NCC warning: No company, trade house or user shall change the frequency, i ncrease the power or change the features and functions of the original design of the low-power radio frequency equipment which has obtained the inspection certificate without approval.
SOUNDGIL CUBE Mini Terms of Warranty i. One year of limited warranty for the main unit (applicable to SOUNDGIL genuine products only) Within One year from the date of purchase ( excluding the day of purchase ), we will either perform repair or replace the main unit with a product of the same model and specifications, as appropriate under the limited warranty for the main unit,once the performance failure has been determined by SOUNDGIL as non-man-made damage.
iii.Scope of Warranty Coverage 1.SOUNDGIL warranty covers the SOUNDGIL genuine audio and the SOUNDGIL genuine accessories included in the original package ( hereafter "SOUNDGIL Products” collectively ) purchased by users from an authorized distributor. 2.
3. SOUNDGIL makes no warranty of interruption or error-free operation of SOUNDGIL products. SOUNDGIL will not be held liable for the inability to use the product or any damage arising out of non-compliance with the operating instructions pertaining to the product. 4. The warranty does not cover: (1) Consumables ( e.g.
(7) SOUNDGIL products which have undergone modification for the purpose of function or performance change without the written permission from SOUNDGIL; (8) Defects as a result of normal wear and deterioration of SOUNDGIL products; (9) Removal or smudging of any serial number on SOUNDGIL products;and (10) Stolen products that government agencies have alerted SOUNDGIL to and for which you are unable to prove you are the authorized user in any possible way ( e.g. proof of purchase ). v.Warranty Procedures 1.
3. If you submit your application to SOUNDGIL or SOUNDGIL authorized service centers under the terms of the warranty within the warranty period, SOUNDGIL may perform the following as appropriate (the level of product damage should be assessed based on the inspection carried by SOUNDGIL, whereas the information provided by the user is for reference only): A.
The replaced SOUNDGIL products or parts shall become your property and the retired or refunded SOUNDGIL products shall become SOUNDGIL's property. 5. Application to Warranty Service You may use the information below to contact your SOUNDGIL representative or (if applicable) retail stores operated by SOUNDGIL (hereafter "SOUNDGIL Retail Store").The SOUNDGIL retail store will help you verify if your SOUNDGIL products have to be repaired.
application of funds,expected savings,business, opportunities, goodwill or data,compromised or corrupted programs, or any indirect or consequential loss or damage due to any reason (including but not limited to replacement of equipment and property). vii.General Rules SOUNDGIL reserves the right to make changes to the warranty at any time.Any SOUNDGIL distributor,retail store,agent or employee is not entitled to make amendments, extensions or additions to the content of the warranty.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.