User's Manual

28
in.tune instructions
29
in.tune instructions installation & connections
Step 4
Fixing the mounting sleeve:
a) Insert mounting bracket.
b) Then pull bracket towards
you.
c) Fix bracket with screw
M4x60.
d) Make sure the 6 holes are
correctly aligned.
e) Brake the installation
handle by moving it back
and forth.
f) Repeat steps a) to e) for
the other bracket.
Step 5
Connect wires.
Refer to wiring section (page 23)
of this manual for more details.
Note: The use of an
adjustable torque wrench
is recommended. Torque
setting: 8-12 lbs/in
(0.9-1.36 N/m).
Step 6
Insert the CD player into the
mounting sleeve.
Open front panel and  x CD
player with (4) M4x60 screws.
Note: The use of an
adjustable torque wrench
is recommended. Torque
setting: 8-12 lbs/in
(0.9-1.36 N/m).